From: Song Yoong Siang <yoong.siang.song@intel.com>
To: Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>,
Maciej Fijalkowski <maciej.fijalkowski@intel.com>,
Vedang Patel <vedang.patel@intel.com>,
Jithu Joseph <jithu.joseph@intel.com>,
Andre Guedes <andre.guedes@intel.com>,
Jesper Dangaard Brouer <brouer@redhat.com>,
Stanislav Fomichev <sdf@google.com>,
Jacob Keller <jacob.e.keller@intel.com>,
David Laight <David.Laight@ACULAB.COM>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, bpf@vger.kernel.org,
xdp-hints@xdp-project.net, stable@vger.kernel.org,
Song Yoong Siang <yoong.siang.song@intel.com>
Subject: [xdp-hints] [PATCH net v3 1/1] igc: read before write to SRRCTL register
Date: Fri, 14 Apr 2023 23:49:02 +0800 [thread overview]
Message-ID: <20230414154902.2950535-1-yoong.siang.song@intel.com> (raw)
igc_configure_rx_ring() function will be called as part of XDP program
setup. If Rx hardware timestamp is enabled prio to XDP program setup,
this timestamp enablement will be overwritten when buffer size is
written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL
register. This commit is tested by using xdp_hw_metadata bpf selftest
tool. The tool enables Rx hardware timestamp and then attach XDP program
to igc driver. It will display hardware timestamp of UDP packet with
port number 9092. Below are detail of test steps and results.
Command on DUT:
sudo ./xdp_hw_metadata <interface name>
Command on Link Partner:
echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch:
skb hwtstamp is not found!
Result after this patch:
found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same:
Command:
sudo ./testptp -d /dev/ptp0 -g
Result:
clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
v2 -> v3: Refactor SRRCTL definitions to more human readable definitions
v1 -> v2: Fix indention
---
drivers/net/ethernet/intel/igc/igc_base.h | 11 ++++++++---
drivers/net/ethernet/intel/igc/igc_main.c | 7 +++++--
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_base.h b/drivers/net/ethernet/intel/igc/igc_base.h
index 7a992befca24..9f3827eda157 100644
--- a/drivers/net/ethernet/intel/igc/igc_base.h
+++ b/drivers/net/ethernet/intel/igc/igc_base.h
@@ -87,8 +87,13 @@ union igc_adv_rx_desc {
#define IGC_RXDCTL_SWFLUSH 0x04000000 /* Receive Software Flush */
/* SRRCTL bit definitions */
-#define IGC_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
-#define IGC_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
-#define IGC_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IGC_SRRCTL_BSIZEPKT_MASK GENMASK(6, 0)
+#define IGC_SRRCTL_BSIZEPKT(x) FIELD_PREP(IGC_SRRCTL_BSIZEPKT_MASK, \
+ (x) / 1024) /* in 1 KB resolution */
+#define IGC_SRRCTL_BSIZEHDR_MASK GENMASK(13, 8)
+#define IGC_SRRCTL_BSIZEHDR(x) FIELD_PREP(IGC_SRRCTL_BSIZEHDR_MASK, \
+ (x) / 64) /* in 64 bytes resolution */
+#define IGC_SRRCTL_DESCTYPE_MASK GENMASK(27, 25)
+#define IGC_SRRCTL_DESCTYPE_ADV_ONEBUF FIELD_PREP(IGC_SRRCTL_DESCTYPE_MASK, 1)
#endif /* _IGC_BASE_H */
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 25fc6c65209b..a2d823e64609 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -641,8 +641,11 @@ static void igc_configure_rx_ring(struct igc_adapter *adapter,
else
buf_size = IGC_RXBUFFER_2048;
- srrctl = IGC_RX_HDR_LEN << IGC_SRRCTL_BSIZEHDRSIZE_SHIFT;
- srrctl |= buf_size >> IGC_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl = rd32(IGC_SRRCTL(reg_idx));
+ srrctl &= ~(IGC_SRRCTL_BSIZEPKT_MASK | IGC_SRRCTL_BSIZEHDR_MASK |
+ IGC_SRRCTL_DESCTYPE_MASK);
+ srrctl |= IGC_SRRCTL_BSIZEHDR(IGC_RX_HDR_LEN);
+ srrctl |= IGC_SRRCTL_BSIZEPKT(buf_size);
srrctl |= IGC_SRRCTL_DESCTYPE_ADV_ONEBUF;
wr32(IGC_SRRCTL(reg_idx), srrctl);
--
2.34.1
next reply other threads:[~2023-04-14 15:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-14 15:49 Song Yoong Siang [this message]
2023-04-14 20:05 ` [xdp-hints] " Jesper Dangaard Brouer
2023-04-17 14:24 ` Jesper Dangaard Brouer
2023-04-18 9:31 ` Florian Bezdeka
2023-04-15 9:19 ` Florian Bezdeka
2023-04-16 2:19 ` Song, Yoong Siang
2023-04-17 2:53 ` Zulkifli, Muhammad Husaini
2023-04-17 18:50 ` Jakub Kicinski
2023-04-30 5:05 ` [xdp-hints] Re: [Intel-wired-lan] " naamax.meir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.xdp-project.net/postorius/lists/xdp-hints.xdp-project.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230414154902.2950535-1-yoong.siang.song@intel.com \
--to=yoong.siang.song@intel.com \
--cc=David.Laight@ACULAB.COM \
--cc=andre.guedes@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=brouer@redhat.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacob.e.keller@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=jithu.joseph@intel.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@google.com \
--cc=stable@vger.kernel.org \
--cc=vedang.patel@intel.com \
--cc=xdp-hints@xdp-project.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox