XDP hardware hints discussion mail archive
 help / color / mirror / Atom feed
From: Jesper Dangaard Brouer <brouer@redhat.com>
To: bpf@vger.kernel.org, Stanislav Fomichev <sdf@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	martin.lau@kernel.org, ast@kernel.org, daniel@iogearbox.net,
	alexandr.lobakin@intel.com, larysa.zaremba@intel.com,
	xdp-hints@xdp-project.net, anthony.l.nguyen@intel.com,
	yoong.siang.song@intel.com, boon.leong.ong@intel.com,
	intel-wired-lan@lists.osuosl.org, pabeni@redhat.com,
	jesse.brandeburg@intel.com, kuba@kernel.org, edumazet@google.com,
	john.fastabend@gmail.com, hawk@kernel.org, davem@davemloft.net
Subject: [xdp-hints] [PATCH bpf RFC-V2 1/5] xdp: rss hash types representation
Date: Wed, 29 Mar 2023 18:29:03 +0200	[thread overview]
Message-ID: <168010734324.3039990.16454026957159811204.stgit@firesoul> (raw)
In-Reply-To: <168010726310.3039990.2753040700813178259.stgit@firesoul>

The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.

Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.

The patch introduce a XDP RSS hash type (xdp_rss_hash_type) that can both
be seen as a number that is ordered according by ISO layer, and can be bit
masked to separate IPv4 and IPv6 types for L4 protocols. Room is available
for extending later while keeping these properties. This maps and unifies
difference to hardware specific hashes.

This proposal change the kfunc API bpf_xdp_metadata_rx_hash() to return
this RSS hash type on success.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
 include/net/xdp.h |   76 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 net/core/xdp.c    |    4 ++-
 2 files changed, 79 insertions(+), 1 deletion(-)

diff --git a/include/net/xdp.h b/include/net/xdp.h
index 5393b3ebe56e..1b2b17625c26 100644
--- a/include/net/xdp.h
+++ b/include/net/xdp.h
@@ -8,6 +8,7 @@
 
 #include <linux/skbuff.h> /* skb_shared_info */
 #include <uapi/linux/netdev.h>
+#include <linux/bitfield.h>
 
 /**
  * DOC: XDP RX-queue information
@@ -396,6 +397,81 @@ XDP_METADATA_KFUNC_xxx
 MAX_XDP_METADATA_KFUNC,
 };
 
+/* For partitioning of xdp_rss_hash_type */
+#define RSS_L3		GENMASK(2,0) /* 3-bits = values between 1-7 */
+#define L4_BIT		BIT(3)       /* 1-bit - L4 indication */
+#define RSS_L4_IPV4	GENMASK(6,4) /* 3-bits */
+#define RSS_L4_IPV6	GENMASK(9,7) /* 3-bits */
+#define RSS_L4		GENMASK(9,3) /* = 7-bits - covering L4 IPV4+IPV6 */
+#define L4_IPV6_EX_BIT	BIT(9)       /* 1-bit - L4 IPv6 with Extension hdr */
+				     /* 11-bits in total */
+
+/* Lower 4-bits value of xdp_rss_hash_type */
+enum xdp_rss_L4 {
+	XDP_RSS_L4_MASK		= GENMASK(3,0), /* 4-bits = values between 0-15 */
+	XDP_RSS_L4_NONE		= 0, /* Not L4 based hash */
+	XDP_RSS_L4_ANY		= 1, /* L4 based hash but protocol unknown */
+	XDP_RSS_L4_TCP		= 2,
+	XDP_RSS_L4_UDP		= 3,
+	XDP_RSS_L4_SCTP		= 4,
+	XDP_RSS_L4_IPSEC	= 5, /* L4 based hash include IPSEC SPI */
+/*
+ RFC: We don't care about vasting space, then we could just store the
+ protocol number (8-bits) directly. See /etc/protocols
+	XDP_RSS_L4_TCP		= 6,
+	XDP_RSS_L4_UDP		= 17,
+	XDP_RSS_L4_SCTP		= 132,
+	XDP_RSS_L4_IPSEC_ESP	= 50, // Issue: mlx5 didn't say ESP or AH
+	XDP_RSS_L4_IPSEC_AH	= 51, // both ESP+AH just include SPI in hash
+ */
+};
+
+/* Values shifted for use in xdp_rss_hash_type */
+enum xdp_rss_L3 {
+	XDP_RSS_L3_MASK		= GENMASK(5,4), /* 2-bits = values between 1-3 */
+	XDP_RSS_L3_IPV4		= FIELD_PREP_CONST(XDP_RSS_L3_MASK, 1),
+	XDP_RSS_L3_IPV6		= FIELD_PREP_CONST(XDP_RSS_L3_MASK, 2),
+};
+
+/* Bits shifted for use in xdp_rss_hash_type */
+enum xdp_rss_bit {
+	XDP_RSS_BIT_MASK	= GENMASK(7,6), /* 2-bits */
+	/* IPv6 Extension Hdr */
+	XDP_RSS_BIT_EX = FIELD_PREP_CONST(XDP_RSS_BIT_MASK, BIT(0)),
+	/* XDP_RSS_BIT_VLAN ??? = FIELD_PREP_CONST(XDP_RSS_BIT_MASK, BIT(1)), */
+};
+
+/* RSS hash type combinations used for driver HW mapping */
+enum xdp_rss_hash_type {
+	XDP_RSS_TYPE_NONE            = 0,
+	XDP_RSS_TYPE_L2              = XDP_RSS_TYPE_NONE,
+
+	XDP_RSS_TYPE_L3_MASK         = XDP_RSS_L3_MASK,
+	XDP_RSS_TYPE_L3_IPV4         = XDP_RSS_L3_IPV4,
+	XDP_RSS_TYPE_L3_IPV6         = XDP_RSS_L3_IPV6,
+	XDP_RSS_TYPE_L3_IPV6_EX      = XDP_RSS_L3_IPV6 | XDP_RSS_BIT_EX,
+
+	XDP_RSS_TYPE_L4_MASK         = XDP_RSS_L4_MASK,
+	XDP_RSS_TYPE_L4_ANY          = XDP_RSS_L4_ANY,
+	XDP_RSS_TYPE_L4_IPV4_TCP     = XDP_RSS_L3_IPV4 | XDP_RSS_L4_TCP,
+	XDP_RSS_TYPE_L4_IPV4_UDP     = XDP_RSS_L3_IPV4 | XDP_RSS_L4_UDP,
+	XDP_RSS_TYPE_L4_IPV4_SCTP    = XDP_RSS_L3_IPV4 | XDP_RSS_L4_SCTP,
+
+	XDP_RSS_TYPE_L4_IPV6_TCP     = XDP_RSS_L3_IPV6 | XDP_RSS_L4_TCP,
+	XDP_RSS_TYPE_L4_IPV6_UDP     = XDP_RSS_L3_IPV6 | XDP_RSS_L4_UDP,
+	XDP_RSS_TYPE_L4_IPV6_SCTP    = XDP_RSS_L3_IPV6 | XDP_RSS_L4_UDP,
+
+	XDP_RSS_TYPE_L4_IPV6_TCP_EX  = XDP_RSS_TYPE_L4_IPV6_TCP |XDP_RSS_BIT_EX,
+	XDP_RSS_TYPE_L4_IPV6_UDP_EX  = XDP_RSS_TYPE_L4_IPV6_UDP |XDP_RSS_BIT_EX,
+	XDP_RSS_TYPE_L4_IPV6_SCTP_EX = XDP_RSS_TYPE_L4_IPV6_SCTP|XDP_RSS_BIT_EX,
+};
+#undef RSS_L3
+#undef L4_BIT
+#undef RSS_L4_IPV4
+#undef RSS_L4_IPV6
+#undef RSS_L4
+#undef L4_IPV6_EX_BIT
+
 #ifdef CONFIG_NET
 u32 bpf_xdp_metadata_kfunc_id(int id);
 bool bpf_dev_bound_kfunc_id(u32 btf_id);
diff --git a/net/core/xdp.c b/net/core/xdp.c
index 7133017bcd74..81d41df30695 100644
--- a/net/core/xdp.c
+++ b/net/core/xdp.c
@@ -721,12 +721,14 @@ __bpf_kfunc int bpf_xdp_metadata_rx_timestamp(const struct xdp_md *ctx, u64 *tim
  * @hash: Return value pointer.
  *
  * Return:
- * * Returns 0 on success or ``-errno`` on error.
+ * * Returns (positive) RSS hash **type** on success or ``-errno`` on error.
+ * * ``enum xdp_rss_hash_type`` : RSS hash type
  * * ``-EOPNOTSUPP`` : means device driver doesn't implement kfunc
  * * ``-ENODATA``    : means no RX-hash available for this frame
  */
 __bpf_kfunc int bpf_xdp_metadata_rx_hash(const struct xdp_md *ctx, u32 *hash)
 {
+	BTF_TYPE_EMIT(enum xdp_rss_hash_type);
 	return -EOPNOTSUPP;
 }
 



  reply	other threads:[~2023-03-29 16:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-29 16:28 [xdp-hints] [PATCH bpf RFC-V2 0/5] XDP-hints: API change for RX-hash kfunc bpf_xdp_metadata_rx_hash Jesper Dangaard Brouer
2023-03-29 16:29 ` Jesper Dangaard Brouer [this message]
2023-03-29 17:59   ` [xdp-hints] Re: [PATCH bpf RFC-V2 1/5] xdp: rss hash types representation Jesper Dangaard Brouer
2023-03-29 21:46   ` Toke Høiland-Jørgensen
2023-03-29 16:29 ` [xdp-hints] [PATCH bpf RFC-V2 2/5] igc: bpf_xdp_metadata_rx_hash return xdp rss hash type Jesper Dangaard Brouer
2023-03-29 16:29 ` [xdp-hints] [PATCH bpf RFC-V2 3/5] veth: " Jesper Dangaard Brouer
2023-03-29 16:29 ` [xdp-hints] [PATCH bpf RFC-V2 4/5] mlx5: " Jesper Dangaard Brouer
2023-03-29 16:29 ` [xdp-hints] [PATCH bpf RFC-V2 5/5] mlx4: " Jesper Dangaard Brouer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://lists.xdp-project.net/postorius/lists/xdp-hints.xdp-project.net/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=168010734324.3039990.16454026957159811204.stgit@firesoul \
    --to=brouer@redhat.com \
    --cc=alexandr.lobakin@intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=ast@kernel.org \
    --cc=boon.leong.ong@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=larysa.zaremba@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.lau@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@google.com \
    --cc=xdp-hints@xdp-project.net \
    --cc=yoong.siang.song@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox