From: Jesper Dangaard Brouer <brouer@redhat.com>
To: bpf@vger.kernel.org
Cc: xdp-hints@xdp-project.net, Jesper Dangaard Brouer <brouer@redhat.com>
Subject: [xdp-hints] [PATCH RFC bpf-next 9/9] mvneta: add XDP-hints support
Date: Tue, 28 Jun 2022 18:31:19 +0200 [thread overview]
Message-ID: <165643387907.449467.15379243921107938760.stgit@firesoul> (raw)
In-Reply-To: <165643378969.449467.13237011812569188299.stgit@firesoul>
From: Lorenzo Bianconi <lorenzo@kernel.org>
Similar to i40e driver, add xdp hw-hints support for mvneta driver in
order to report rx csum offload for xdp_redirect.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
drivers/net/ethernet/marvell/mvneta.c | 61 ++++++++++++++++++++++++++++-----
1 file changed, 52 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 384f5a16753d..4f73ba905741 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -40,6 +40,7 @@
#include <net/page_pool.h>
#include <net/pkt_cls.h>
#include <linux/bpf_trace.h>
+#include <linux/btf.h>
/* Registers */
#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
@@ -371,6 +372,9 @@
#define MVNETA_RX_GET_BM_POOL_ID(rxd) \
(((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
+static struct btf *mvneta_btf;
+static s32 btf_id_xdp_hints;
+
enum {
ETHTOOL_STAT_EEE_WAKEUP,
ETHTOOL_STAT_SKB_ALLOC_ERR,
@@ -2308,12 +2312,15 @@ mvneta_swbm_rx_frame(struct mvneta_port *pp,
struct mvneta_rx_desc *rx_desc,
struct mvneta_rx_queue *rxq,
struct xdp_buff *xdp, int *size,
- struct page *page)
+ struct page *page, u32 status)
{
unsigned char *data = page_address(page);
int data_len = -MVNETA_MH_SIZE, len;
+ struct xdp_hints_common *xdp_hints;
struct net_device *dev = pp->dev;
enum dma_data_direction dma_dir;
+ u32 xdp_hints_flags;
+ u16 cksum;
if (*size > MVNETA_MAX_RX_BUF_SIZE) {
len = MVNETA_MAX_RX_BUF_SIZE;
@@ -2336,6 +2343,18 @@ mvneta_swbm_rx_frame(struct mvneta_port *pp,
xdp_buff_clear_frags_flag(xdp);
xdp_prepare_buff(xdp, data, pp->rx_offset_correction + MVNETA_MH_SIZE,
data_len, false);
+
+ if (!(pp->dev->features & NETIF_F_XDP_HINTS))
+ return;
+
+ xdp_hints = xdp->data - sizeof(*xdp_hints);
+ cksum = mvneta_rx_csum(pp, status);
+ xdp_hints_flags = xdp_hints_set_rx_csum(xdp_hints, cksum, 0);
+ xdp_hints_set_flags(xdp_hints, xdp_hints_flags);
+ xdp_hints->btf_id = btf_id_xdp_hints;
+ xdp->data_meta = xdp->data - sizeof(*xdp_hints);
+
+ xdp_buff_set_hints(xdp, BTF_ORIGIN_VMLINUX, true);
}
static void
@@ -2385,9 +2404,24 @@ mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
*size -= len;
}
+static void
+mvneta_set_skb_cksum_from_xdp(struct xdp_buff *xdp, struct sk_buff *skb)
+{
+ struct xdp_hints_common *xdp_hints;
+
+ if (!(xdp_buff_has_hints_compat(xdp)))
+ return;
+
+ if (xdp->data - xdp->data_meta < sizeof(*xdp_hints))
+ return;
+
+ xdp_hints = xdp->data - sizeof(*xdp_hints);
+ skb->ip_summed = xdp_hints->xdp_hints_flags & HINT_FLAG_CSUM_TYPE_MASK;
+}
+
static struct sk_buff *
mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
- struct xdp_buff *xdp, u32 desc_status)
+ struct xdp_buff *xdp)
{
struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
struct sk_buff *skb;
@@ -2404,7 +2438,7 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct page_pool *pool,
skb_reserve(skb, xdp->data - xdp->data_hard_start);
skb_put(skb, xdp->data_end - xdp->data);
- skb->ip_summed = mvneta_rx_csum(pp, desc_status);
+ mvneta_set_skb_cksum_from_xdp(xdp, skb);
if (unlikely(xdp_buff_has_frags(xdp)))
xdp_update_skb_shared_info(skb, num_frags,
@@ -2424,8 +2458,8 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
struct net_device *dev = pp->dev;
struct mvneta_stats ps = {};
struct bpf_prog *xdp_prog;
- u32 desc_status, frame_sz;
struct xdp_buff xdp_buf;
+ u32 frame_sz;
xdp_init_buff(&xdp_buf, PAGE_SIZE, &rxq->xdp_rxq);
xdp_buf.data_hard_start = NULL;
@@ -2458,10 +2492,8 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
size = rx_desc->data_size;
frame_sz = size - ETH_FCS_LEN;
- desc_status = rx_status;
-
mvneta_swbm_rx_frame(pp, rx_desc, rxq, &xdp_buf,
- &size, page);
+ &size, page, rx_status);
} else {
if (unlikely(!xdp_buf.data_hard_start)) {
rx_desc->buf_phys_addr = 0;
@@ -2487,7 +2519,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
mvneta_run_xdp(pp, rxq, xdp_prog, &xdp_buf, frame_sz, &ps))
goto next;
- skb = mvneta_swbm_build_skb(pp, rxq->page_pool, &xdp_buf, desc_status);
+ skb = mvneta_swbm_build_skb(pp, rxq->page_pool, &xdp_buf);
if (IS_ERR(skb)) {
struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
@@ -5613,7 +5645,7 @@ static int mvneta_probe(struct platform_device *pdev)
}
dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_TSO | NETIF_F_RXCSUM;
+ NETIF_F_TSO | NETIF_F_RXCSUM | NETIF_F_XDP_HINTS;
dev->hw_features |= dev->features;
dev->vlan_features |= dev->features;
dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
@@ -5817,6 +5849,16 @@ static int __init mvneta_driver_init(void)
{
int ret;
+ mvneta_btf = btf_get_module_btf(THIS_MODULE);
+ if (mvneta_btf) {
+ btf_id_xdp_hints = btf_find_by_name_kind(mvneta_btf,
+ "xdp_hints_common",
+ BTF_KIND_STRUCT);
+ if (btf_id_xdp_hints < 0)
+ pr_warn("%s: BTF cannot find struct xdp_hints_common",
+ MVNETA_DRIVER_NAME);
+ }
+
ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "net/mvneta:online",
mvneta_cpu_online,
mvneta_cpu_down_prepare);
@@ -5844,6 +5886,7 @@ module_init(mvneta_driver_init);
static void __exit mvneta_driver_exit(void)
{
+ btf_put_module_btf(mvneta_btf);
platform_driver_unregister(&mvneta_driver);
cpuhp_remove_multi_state(CPUHP_NET_MVNETA_DEAD);
cpuhp_remove_multi_state(online_hpstate);
prev parent reply other threads:[~2022-06-28 16:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-28 16:30 [xdp-hints] [PATCH RFC bpf-next 0/9] Introduce XDP-hints via BTF Jesper Dangaard Brouer
2022-06-28 16:30 ` [xdp-hints] [PATCH RFC bpf-next 1/9] i40e: Refactor i40e_ptp_rx_hwtstamp Jesper Dangaard Brouer
2022-06-28 16:30 ` [xdp-hints] [PATCH RFC bpf-next 2/9] bpf: export btf functions for modules Jesper Dangaard Brouer
2022-06-28 16:30 ` [xdp-hints] [PATCH RFC bpf-next 3/9] net: create xdp_hints_common and set functions Jesper Dangaard Brouer
2022-06-28 16:30 ` [xdp-hints] [PATCH RFC bpf-next 4/9] net: add net_device feature flag for XDP-hints Jesper Dangaard Brouer
2022-06-28 16:30 ` [xdp-hints] [PATCH RFC bpf-next 5/9] xdp: controlling XDP-hints from BPF-prog via helper Jesper Dangaard Brouer
2022-06-29 14:20 ` [xdp-hints] " Toke Høiland-Jørgensen
2022-07-01 9:10 ` Jesper Dangaard Brouer
2022-07-01 12:09 ` Toke Høiland-Jørgensen
2022-06-28 16:31 ` [xdp-hints] [PATCH RFC bpf-next 6/9] i40e: refactor i40e_rx_checksum with helper Jesper Dangaard Brouer
2022-06-28 16:31 ` [xdp-hints] [PATCH RFC bpf-next 7/9] i40e: add XDP-hints handling Jesper Dangaard Brouer
2022-07-18 9:38 ` [xdp-hints] " Maryam Tahhan
2022-07-18 10:27 ` Maryam Tahhan
2022-06-28 16:31 ` [xdp-hints] [PATCH RFC bpf-next 8/9] net: use XDP-hints in xdp_frame to SKB conversion Jesper Dangaard Brouer
2022-06-28 16:31 ` Jesper Dangaard Brouer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.xdp-project.net/postorius/lists/xdp-hints.xdp-project.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=165643387907.449467.15379243921107938760.stgit@firesoul \
--to=brouer@redhat.com \
--cc=bpf@vger.kernel.org \
--cc=xdp-hints@xdp-project.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox