From: Jesper Dangaard Brouer <jbrouer@redhat.com>
To: Song Yoong Siang <yoong.siang.song@intel.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>,
Maciej Fijalkowski <maciej.fijalkowski@intel.com>,
Vedang Patel <vedang.patel@intel.com>,
Jithu Joseph <jithu.joseph@intel.com>,
Andre Guedes <andre.guedes@intel.com>,
Stanislav Fomichev <sdf@google.com>
Cc: brouer@redhat.com, intel-wired-lan@lists.osuosl.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
bpf@vger.kernel.org, xdp-hints@xdp-project.net,
stable@vger.kernel.org
Subject: [xdp-hints] Re: [PATCH net 1/1] igc: read before write to SRRCTL register
Date: Thu, 13 Apr 2023 20:42:16 +0200 [thread overview]
Message-ID: <07a88087-bee8-e549-c069-63d52268aef1@redhat.com> (raw)
In-Reply-To: <20230413151222.1864307-1-yoong.siang.song@intel.com>
On 13/04/2023 17.12, Song Yoong Siang wrote:
> igc_configure_rx_ring() function will be called as part of XDP program
> setup. If Rx hardware timestamp is enabled prio to XDP program setup,
> this timestamp enablement will be overwritten when buffer size is
> written into SRRCTL register.
>
Ah, I believe I have hit this bug with my igc patches.
Thanks for fixing.
> Thus, this commit read the register value before write to SRRCTL
> register. This commit is tested by using xdp_hw_metadata bpf selftest
> tool. The tool enables Rx hardware timestamp and then attach XDP program
> to igc driver. It will display hardware timestamp of UDP packet with
> port number 9092. Below are detail of test steps and results.
>
> Command on DUT:
> sudo ./xdp_hw_metadata <interface name>
>
Why port 9092 ?
The ./xdp_hw_metadata prog will redirect port 9091
> Command on Link Partner:
> echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
>
Again port 9092 ?
> Result before this patch:
> skb hwtstamp is not found!
>
> Result after this patch:
> found skb hwtstamp = 1677762212.590696226
I usually use this cmd to see if number is sane:
$ date -d @1677762212
2023-03-02T14:03:32 CET
>
> Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
> Cc: <stable@vger.kernel.org> # 5.14+
> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
> ---
> drivers/net/ethernet/intel/igc/igc_base.h | 7 +++++--
> drivers/net/ethernet/intel/igc/igc_main.c | 5 ++++-
> 2 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_base.h b/drivers/net/ethernet/intel/igc/igc_base.h
> index 7a992befca24..b95007d51d13 100644
> --- a/drivers/net/ethernet/intel/igc/igc_base.h
> +++ b/drivers/net/ethernet/intel/igc/igc_base.h
> @@ -87,8 +87,11 @@ union igc_adv_rx_desc {
> #define IGC_RXDCTL_SWFLUSH 0x04000000 /* Receive Software Flush */
>
> /* SRRCTL bit definitions */
> -#define IGC_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
> -#define IGC_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
> +#define IGC_SRRCTL_BSIZEPKT_MASK GENMASK(6, 0)
> +#define IGC_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
> +#define IGC_SRRCTL_BSIZEHDRSIZE_MASK GENMASK(13, 8)
> +#define IGC_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
> +#define IGC_SRRCTL_DESCTYPE_MASK GENMASK(27, 25)
> #define IGC_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
>
> #endif /* _IGC_BASE_H */
> diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
> index 25fc6c65209b..de7b21c2ccd6 100644
> --- a/drivers/net/ethernet/intel/igc/igc_main.c
> +++ b/drivers/net/ethernet/intel/igc/igc_main.c
> @@ -641,7 +641,10 @@ static void igc_configure_rx_ring(struct igc_adapter *adapter,
> else
> buf_size = IGC_RXBUFFER_2048;
>
> - srrctl = IGC_RX_HDR_LEN << IGC_SRRCTL_BSIZEHDRSIZE_SHIFT;
> + srrctl = rd32(IGC_SRRCTL(reg_idx));
> + srrctl &= ~(IGC_SRRCTL_BSIZEPKT_MASK | IGC_SRRCTL_BSIZEHDRSIZE_MASK |
> + IGC_SRRCTL_DESCTYPE_MASK);
> + srrctl |= IGC_RX_HDR_LEN << IGC_SRRCTL_BSIZEHDRSIZE_SHIFT;
> srrctl |= buf_size >> IGC_SRRCTL_BSIZEPKT_SHIFT;
> srrctl |= IGC_SRRCTL_DESCTYPE_ADV_ONEBUF;
>
next prev parent reply other threads:[~2023-04-13 18:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-13 15:12 [xdp-hints] " Song Yoong Siang
2023-04-13 16:54 ` [xdp-hints] " Jacob Keller
2023-04-13 18:42 ` Jesper Dangaard Brouer [this message]
2023-04-14 1:33 ` Song, Yoong Siang
2023-04-13 19:05 ` Jesper Dangaard Brouer
2023-04-14 1:36 ` Song, Yoong Siang
2023-04-30 5:03 ` [xdp-hints] Re: [Intel-wired-lan] " naamax.meir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.xdp-project.net/postorius/lists/xdp-hints.xdp-project.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=07a88087-bee8-e549-c069-63d52268aef1@redhat.com \
--to=jbrouer@redhat.com \
--cc=andre.guedes@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=brouer@redhat.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=jithu.joseph@intel.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@google.com \
--cc=stable@vger.kernel.org \
--cc=vedang.patel@intel.com \
--cc=xdp-hints@xdp-project.net \
--cc=yoong.siang.song@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox